Blog
win2012-2

Port Forwarding on Windows Server or VPS

Windows Firewall is a utility included with all recent versions of Windows. It includes options to open and close ports, allow specific ports and programs through the firewall, which is the equivalent of “port forwarding” on a Windows Server or Windows VPS that is not behind a NAT device. In this guide we will show you how to forward a specific port on a Windows VPS or dedicated server.

How To Port Forward on Windows VPS

First, open Control Panel and navigate to System & Security. Then, open Windows Firewall. In the left-hand menu, click “Advanced settings”.

Screen Shot 2015-06-29 at 4.22.09 PM

The Advanced Security panel will appear. In the left-hand menu, there are two types of rules:

  • Inbound Rules: Rules that deny or allow traffic coming in to the server from outside.
  • Outbound Rules: Rules that deny or allow traffic going out to the network from the server.

Screen Shot 2015-06-29 at 4.23.06 PM

It is often useful to create both an inbound rule and an outbound rule for your application’s port. Repeat the following steps 2 times, once for Inbound, and once for Outbound. First, right-click “Inbound Rules” and select “New Rule…” 

Screen Shot 2015-06-29 at 4.23.24 PM

 Choose the type of rule to setup. We are defining a specific Port number.

Screen Shot 2015-06-29 at 4.23.41 PM

Type the port number your application uses, and choose TCP or UDP protocol (most applications use TCP).

Screen Shot 2015-06-29 at 4.24.01 PM

Select whether to apply the rule only on local (private) networks, or on public networks as well. You will want to select Public, most likely.

Screen Shot 2015-06-29 at 4.24.39 PM

Finally, select whether this rule is for explicitly allowing connections on this port, or explicitly blocking connections on this port.

Screen Shot 2015-06-29 at 4.24.18 PM

That’s it! The firewall rule will go into effect immediately, opening the port to traffic to (or from) your server. As we noted above, be sure to repeat the process as an Outbound rule, if you want to open a port for both sending and receiving.

Need help?

We are happy to help with opening ports and other Windows Server configuration questions!

This guide applies to:

  • Windows Server 2016
  • Windows Server 2012 R2
  • Windows Server 2008 R2
  • Windows Server 2008
  • Windows 8
  • Windows 7
This entry was posted in Tech Support, VPS Hosting, Windows Server, Windows VPS. Bookmark the permalink. Trackbacks are closed, but you can post a comment.
  • Xakep Pes

    that is useless. it not defines ip address of a machine, which would recieve forwarded traffic. so it is NOT a “port forwarding”, but is only a bull shit windows firewall config for dumbasses!!! AHAHAH go kill yourself odmin :D




Questions? We're here to help.    Chat with us